,

Vintage Single Coil Pickups Set Neck&Bridge Pickup 50mm/55mm for Fender Telecaster Style 6 String Electric Guitar

Amazon.com Price: $15.99 (as of 30/01/2023 16:47 PST- Details)

+ Free Shipping

It fits for vintage Fender Strats style electric guitar or similar guitar, neck and bridge pickup set parts replacement. As a pair of matched pickups, these are an unbeatable combination in your classic guitar.
This hotter pickups are made of metal and ceramic magnet, ABS plastic bobbin, durable to use, 6 flat fixed pole pieces, higher than bobbin. Ttriple wax dipped and vacuum sealed to eliminate any unwanted feedback and noise.
PVC coated magent wire at dual end, two conductor, the shielded wire can help to eliminate noise and to play mostly very cleanly, have a bright tone, nice clean and nice high gain tones.

This is a worthy upgrade to the stock pickups in the squier tele. This Tele Pickups low output vintage wind 5.9k have that classic 50s 60s whatever tele twang and honk clear tone. It willl almost remind you of the Fender Vintage reissue 52’s clarity and balance with the ability to growl when pushed. Tonality and bite is superb, with that single-coil bite, but none of the usual pick-up buzz/noise.

Features:
– Triple wax dipped and vacuum sealed to eliminate any unwanted feedback and noise.
– It use shielded wire instead of the flimsy two-part wire, safe wiring with good noise protection.
– Fits perfectly well in a ‘92 American Standard cavity.
– Position: Bridge, Neck
– Resistance: 5.5K-6K
– Weight: 150g/5.29 ounces

How to install ?
At the first, you only need to make sure that pick guard is tight on these, and require some modification though you could open the pups hole up just a little bit, if you don’t want to butcher your pick guard, you can use a fine file and just gently take off a few thousands off each side of the hole. To enlarge the installation holes in the neck bridge to accommodate the original screws and springs. Each pickup has two wires(Shielded Wire) that need to be soldered. Get your soldering iron to the ‘right’ temperature to just melt the solder, not so hot it just keeps melting it.

Package Included:
1 x Neck Pickup
1 x Bridge Pickup
5 x Screws
5 x Springs

It fits for vintage Fender Strats style electric guitar or similar guitar, neck and bridge pickup set parts replacement. As a pair of matched pickups, these are an unbeatable combination in your classic guitar.
This hotter pickups are made of metal and ceramic magnet, ABS plastic bobbin, durable to use, 6 flat fixed pole pieces, higher than bobbin. Ttriple wax dipped and vacuum sealed to eliminate any unwanted feedback and noise.
PVC coated magent wire at dual end, two conductor, the shielded wire can help to eliminate noise and to play mostly very cleanly, have a bright tone, nice clean and nice high gain tones.
Neck pickup: chrome, plated metal cover, 50mm string pole spacing, resistance: 5.5K, inductance: 2.36H, standard Tele rhythm sound. Bridge pickup: black, 53mm string pole spacing, resistance: 6K, inductance: 3.37H, standard Tele lead sound.
Package Included: 1pcs neck pickup, 1pcs bridge pickup, 5pcs screws and 5pcs springs

Item Weight

Package Dimensions

Date First Available

Guitar Pickup Configuration

Material Type

Musical Style

Brand

Reviews

There are no reviews yet.

Be the first to review “Vintage Single Coil Pickups Set Neck&Bridge Pickup 50mm/55mm for Fender Telecaster Style 6 String Electric Guitar”

Your email address will not be published. Required fields are marked *

Shopping Cart